New Model Number S234, but same Professional Formula
PROFESSIONAL GRADE NATURAL STONE SEALER IMPREGNATOR FOR ALL NATURAL STONE.
A silicone base impregnator of highest stability against dirt, water, oil, and alkali infiltration. For interior and exterior use on all natural and cast stone and regardless of surface finish. Surface treated with HMK® S34 is 98% vapor permeable, UV resistant, and leaves a natural appearance. Not effective on non-absorbing surfaces.
Due to VOC restrictions, we cannot ship this item to the following Southern California Counties:
(Los Angeles, Orange, Riverside, and San Bernardino Counties)
All other areas, this product must be shipped UPS Ground.
SUGGESTED PREPARATION: Use HMK R55 Intensive Cleaner, Rinse thorougly and allow to dry for 12-24 hours.
Apply to chemically clean and dry surface using a Sealer Applicator Sponge, a natural bristle brush, roller, or the HMK® Z170-171 brushes. One or two even applications, wet on wet are usually sufficient. For more absorbent surfaces additional coats may be required. Allow 5-10 minutes between each application for penetration. Thoroughly remove excess HMK® S34 5-10 minutes after last application using a Premium Microfiber Wiping Cloth or with a terry cloth towel. If product dries on the surface, remove by adding more S34 product to area and immediately wipe and buff to a dry shine. Allow to cure for at least 24 hours.
50 - 220 per 1 liter (34 oz.) container depending on porosity of stone.
1 Liter can.
Chemical product. Contains Turpentine Substitute. Flammable. Use with adequate ventilation. Avoid eye and skin contact. If exposed, wash/flush with water. Keep out of reach of children.
Limitation of liability: The liability of HMK® for defective products and any claims for damages whatsoever is limited to the purchase price of the products. HMK® shall not be liable for any consequential damages. No other warranty or representation is made or implied.