A silicone base impregnator of highest stability against dirt, water, oil, and alkali infiltration. For interior and exterior use on all natural and cast stone and regardless of surface finish. Surface treated with HMK® S34 is 98% vapor permeable, UV resistant, and leaves a natural appearance. Not effective on non-absorbing surfaces. SHIPPING: This item shipped UPS Ground, rate will be calculated at checkout.
Apply to chemically clean and dry surface with a roller, a natural bristle brush or the HMK® Z170-171 brushes. One or two even applications, wet on wet are usually sufficient. For more absorbent surfaces additional coats may be required. Allow 5-10 minutes between each application for penetration. Thoroughly remove excess HMK® S34 5-10 minutes after last application with a terry cloth towel by adding more S34 or pure solvent if necessary to facilitate the removal of S34. Allow to cure for at least 24 hours.
50 - 220 per 1 liter (34 oz.) container depending on porosity of stone
This Package: Quarter Liter
Chemical product. Contains Turpentine Substitute. Flammable. Use with adequate ventilation. Avoid eye and skin contact. If exposed, wash/flush with water. Keep out of reach of children. See Material Safety Data Sheet.