Commercial Grade Stone Cleaner for all Natural Stone Surfaces
R55 Intensive Stone Cleaner
A superior pH 8.5 Cleaner for use on all New and Existing Interior and Exterior Natural Stone, Cultured Sttone, Cast Stone, Agglomerate, and Ceramic Tile, regardless of surface finish. Especially formulated to remove cement/grout film residue, light construction dirt, soil, and light wax coats. Recommended for polished and honed surfaces since it does not contain acid and will not etch finishes. Use HMK¨ R80 for heavy wax removal.
For initial cleaning apply 1:4 or 1:6 depending on nature of cleaning. For periodic thorough cleaning dilute 1:10 with water. Let stand for 10-20 minutes, but do not let R55 dry on the surface. Scrub vigorously with a Scrubbing Sponge, Nylon Scrub Brush or white/tan polyester pad.
Re-wet area with same solution as needed. Let stand again for a few minutes, then flood rinse with clean water and sponge up or use wet vac (use de-foamer in vacuum). A second application may be required for stubborn spots. Double or triple rinsing may be necessary, especially if a sealer/impregnator or a polish is to be applied. Use a de-foamer in wet-vacs to prevent foaming in scrubber tanks.
For larger floor applications use a Scrubbing Mop Pad with our Professional Mop Kit. Rinse with Clean Water, allow surface to completely dry before applying sealers.
For larger walls or shower areas use a Professional Cleaning Sponge to apply cleaner. Rinse with Clean Water, allow surface to completely dry before applying sealers.
Approximately 110 to 320 sq ft, diluted per 1 liter (34 oz.) container.
Chemical product. Non flammable, non toxic, no fumes, mild odor. Keep out of reach of children.
Limitation of liability: The liability of HMK® for defective products and any claims for damages whatsoever is limited to the purchase price of the products. HMK® shall not be liable for any consequential damages. No other warranty or representation is made or implied.