A modified acrylic base natural stone Satin Finish natural stone sealer which produces a tough, hard, and highly protective finish. HMK® S237 protects against water, dirt, and oil infiltration. For interior use on honed and textured mineral surfaces. S237 enhances the stone's color and texture, leaving a satin finish. S37 is highly vapor permeable, UV resistant, and slip retardant. Not effective on polished, glazed, non-absorbing surfaces, or wet areas.
This item shipped UPS Ground, rate will be calculated at checkout.
Apply to chemically clean and dry surface with a roller or a natural bristle brush. One or two thin and even applications are usually sufficient, depending on porosity of the stone or desired color enhancement. Allow 30-90 minutes between each application; do not allow to puddle. Allow 6-12 hours to dry before walking on and 24-48 hours to fully cure. Do not apply with temperatures above 85F or below 50F.
60-100 sqft., 5.5-9 square meters per 1 liter (34 oz.) container.
Chemical product. Contains Petroleum Product, n.o.s. Flammable. Use with adequate ventilation. Avoid eye and skin contact. If exposed, wash/flush with water. Keep out of reach of children.
Store in cool place. Keep lid tightly closed. Do not store at temperatures above 85F or below 50F
Perform testing on a sample tile and actual installation to determine number of coats necessary to protect particular stone, visual appearance of tile after S237 application and stain protection against water, dirt, and oil infiltration.
Limitation of liability: The liability of HMK® for defective products and any claims for damages whatsoever is limited to the purchase price of the products. HMK® shall not be liable for any consequential damages. No other warranty or representation is made or implied.