COMPLETE SEALER KIT:
1-LITER S34 SILICONE IMPREGNATOR
SEALER APPLICATOR MICROFIBER SPONGE
PREMIUM MICROFIBER WIPING CLOTH
A silicone base impregnator of highest stability against dirt, water, oil, and alkali infiltration. For interior and exterior use on all natural and cast stone and regardless of surface finish. Surface treated with HMK® S34 is 98% vapor permeable, UV resistant, and leaves a natural appearance. Not effective on non-absorbing surfaces.
This item MUST be shipped UPS Ground, rate will be calculated at checkout.
SURFACE PREPARATION: Use HMK R55 Intensive Cleaner, Rinse thoroughly and allowto dry for 12-24 hours.
Apply to chemically clean and dry surface with a natural bristle brush, Microfiber Applicator Sponge, or the HMK® Z170-171 brushes for larger floors. One or two even applications, wet on wet are usually sufficient. DO NOT ALLOW TO DRY ON SURFACE. For more absorbent surfaces additional coats may be required. Allow 10 minutes between each application for thorough penetration. Thoroughly remove excess HMK® S34 10 minutes after last application using our Premium Microfiber Wiping Cloths or with a terry cloth towel. If product dries on surface, remove by adding more S34 to facilitate the removal of excess S34. Allow to cure for at least 24 hours. Applicator Sponge and Microfiber Wiping Cloth are INCLUDED in this Kit.
100 - 200 sqft., 9-18 square meters on polished surfaces, 50-100 sqft., 4.5-9 square meters on other surfaces per 1 liter (34 oz.) container.
Chemical product. Contains Turpentine Substitute. Flammable. Use with adequate ventilation. Avoid eye and skin contact. If exposed, wash/flush with water. Keep out of reach of children. See Material Safety Data Sheet.
Limitation of liability: The liability of HMK® for defective products and any claims for damages whatsoever is limited to the purchase price of the products. HMK® shall not be liable for any consequential damages. No other warranty or representation is made or implied.